VOXLINK 3D 50m HDMI 1.4 DVI extender with Loop-out onver lan cat5e cat 6

VOXLINK 3D 50m HDMI 1.4 DVI extender with Loop-out onver lan cat5e cat 6

Dear customer

Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference.

The DVI Extender uses single cat-5E or cat-6(recommended) cables instead of DVI cable to transmit high definition signal up to 50 meters, cutting down the cost. The extender is designed to supply for long distance transmission of high definition signal.

Our devices offer solutions for noise, space and security concerns, data center control, information distribution, conference room presentation, school and corporate training environments.

FEATURES

l Support HDMI 1.4a

l Support 3D

l Support highest video resolution 1080p/60Hz

l Support Bi-directional IR control

l Support 1.49Gbps data rate and tmds clock up to 148.5MHz

l Support 8 bit deep color

l The transmitter support HDMI loop-out function.

l The transmitter support EDID management.

l Support AWG26 DVI standard cable, input up to 10 meters, output up to 10 meters

l Twisted pair transmission: By using single cat-5e or cat-6(recommended) cable to connect the transmitter and receiver, it can extend the distance up to 50 meters between TX and RX, the quality of the cable will influence the transmission distance.  

l Need DC5V/1A power supply

l EDID instruction:

Product Picture:

Physical Connection Showing Picture:

Operating and Connecting:

1. Connect one DVI cable between source device and TX Extender, the max cable distance is 10 meters

2. Connect one DVI cable between display device and RX Extender, the max cable distance is 10 meters 

3. Connect single cat-5e or cat-6(recommended) cables between TX and RX Extender, the max cable distance is 50 meters 

4. Connect the 2 pairs of IR RX and IR TX cable to the 3.5mm IR RX and IR TX port of the receiver and transmitter respectively.

5. Connect 5V power supply to the TX and RX.

6. LED indicator light

TX LED indicator light: When there is no signal input, it turns blue; When there is signal input, it turns red.

RX LED indicator light: When there is no signal input, it turns blue; When there is signal input, it turns red.

Specification

  Length of CAT-6/CAT-5E cable between Rx and TX…………….............…..Up to 50 meters

DVI Input…..…………………...………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i

Support audio format.……………………………………………………………DTS/Dolby/PCM

Support audio input..……............................…DTS-HD/Dolby-trueHD/DTS/Dolby-AC3/DSD

DVI Output…..…………….…...………24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i

Max transmission bandwidth………………............................………………………148.5MHz

Max baud rate……………….…….………………….………….……………………………1.49Gbps

Input video signal ………….……………………..………………………….…… 0.5~1.5Volts p-p

Output DDC signal …………………………………………...……………………… 5Volts p-p (TTL)

Input DVI cable distance………….…………............…..≤10m AWG26 DVI standard cable

Output DVI cable distance............................................ ≤10m AWG26 DVI standard cable

TX Max working current………………………………………...………….………………...650mA

RX Max working current…………………………………………...………………………...300mA

Power adapter format………...………Input:AC (50HZ, 60HZ) 100V-240V; Output: DC5V/1A

Operating Temperature range……..…………….………………………………… (-15 to +55℃)

Operating Humidity range………………………….….……….5 to 90%RH (No Condensation)

Dimension (L x W x H) ……………………………….…………………………84x87.5x23.5 (mm)

TX Weight…..……………………………………………..………………………........………210g

RX Weight........................................................................................................................200g

The Package Includes:

1. TX Extender :1pc   RX Extender:1 pc

2. IR RX Cable: 2 pcs   IR TX Cable: 2pcs

3. 5V DC Power adapter

4. User Manual

other  VOXLINK 4K 50M HDMI V1.4 Extender over Lan Ethernet CAT5e/6 1080p 3D 4K*2K

Other VOXLINK 120m HDMI Matrix Extender over Lan Ethernet CAT5e/6 IP(Support multipoint to multipoint IR control 1080P)

Other VOXLINK HDMI to HDMI+audio Scaler video Converter Box support 4Kx2K@60Hz ,US/EU/UK

Introduction

The HDMI to HDMI 4Kx2K Scaler Converter is a universal converter for HDMI input to HDMI 4Kx2K@60Hz output. The scaler up/down conversion in this module employs black/white level expansion, color transition improvement, dynamic range expansion, blue stretch , auto-detect and auto-convert HDMI to HDMI output.

Features

1.        No need to install drivers, portable, flexible, plug and play.

2.        Provide advanced signal processing with great precision, colors, resolutions, and details.

3.        Support scaler up, scaler down digital signal porcess.

4.        Support multi- HDMI input formats.

5.        Support HDMI 4Kx2K@60Hz, 4Kx2K@30Hz,1080p@60Hz or 720p@60Hz output.

Package

1.HDMI to HDMI 4Kx2K Scaler Converter          1 pcs

2.5V1A DC Power Supply Adaptor        1 pcs

3.Operation Manual             1 pcs

Specification

Input ports: 1x HDMI, 1 x Min- USB

Output ports: 1xHDMI, 1xEarphone       

Dimensions(mm):   93(D)x84(W)x28(H)

Wight (g):  155g

HDMI input resolution:    480i to 4Kx2K@30Hz

HDMI output resolution:   4Kx2K@60Hz,4Kx2K@30Hz,1080P@60Hz,720P@60Hz

DVI output resolution:         1080P@60Hz,720P@60Hz

Operating Temperature             0°C ~ 40°C / 32°F ~ 104°F

Storage Temperature          -20°C ~ 60°C / -4°F ~ 140°F

Elative Humidity      20 ~ 90% RH (Non-condensing)

Power Consumption (Max)       3.5W

ESD Protection       Human Body Model:    

± 8kV (air-gap discharge)

± 4kV (contact discharge)

Operation Controls and Functions

1.      AUDIO output: These slot is where you connect to the audio amplifier with 3.5mm earphone cable

2.      HDMI input: These slot is where you connect the HDMI source output from DVD, PC or Laptop.

3.      DC 5V IN: Connect the 5V DC power supply into the Converter.

4.      HDMI OUT: The HDMI OUT connect to HDMI equipped TVs or monitors.

5.      UPDATe: System software update.

6.      Power LED: This red LED illuminate when the device is connected with power supply.

7.      Resolution Button: Press this button to select the output resolution.

8.      ZOOM Button: Press this button the scaling of the output picture.

9.      DVI/HDMI Button: Press this button to select DVI or HDMI output.

NOTE: When select DVI output, the output resolution of 1080p or 720p.

 Connection and Installation

1.  Connect a source such as a PC to the Converter VGA input.

2.  Connect the audio signal via the 3.5mm earphone cable.

3.  Connect a display such as a monitor, TV or Projector to the HDMI output on the Converter.

4.  Power on the device and display.

1.we offer various options including DHL,TNT ,UPS,EMS,FEDEX etc,and it would be beneficial for large orders by sea.
2.If you have a shipping account or shipping forward,it could be better,but if you don't have,then we can help you to choose the best way to ship the goods.
Why did our Customers choose us?
1.Strong R&D support
We have a strong R & D team with rich experience in the filed of audio products Fully possess the capability to do 2D design, 3D design, prototype, and so on.
2.Complete Facilities
Having own plastic injection center for doing all the injections by ourselves;
With coating and printing workshop for plastic coating, UV, and silk or pad printing;
Possessing advanced testing equipments for strict quality control & new product development;
With package sealing machines and ultrasonic machines.
3.10 Years of Experiences
Since the establishment, in 2003, we have been dedicated to providing customers with customer satisfaction oriented OEM & ODM services and specialized in designing, manufacturing and marketing medium and high end headphones, headsets, earphones, mobile phone headsets, mini speakers, Skype phone, new concept music products and so on.
4.Long Term Supply Chain
With our sincere and common efforts, we enjoy a well organized and managed local supply chain for high quality products, competitive price, fast delivery, and convenient services.
5.Great Overseas Sales Team
With an overseas sales team with 20 members, they are familiar with the products we manufacture and have more than 3-5 years of experience in handling OEM & ODM projects with clients from worldwide.

OEM/ODM:

· Your Brand--OEM logo and custom Packing (4 color printing box, blister) will be no problem
· Your pantone color --no problem, MOQ 1000pcs
· Usually MOQ--500pcs, please ask us if we have order of other client, MOQ can be less, like 100,200pcs
Warranty & After-sale service:
· all of our products give 1 year warranty
· man-made destroy will be exception
· After the warrantee time, if we still in cooperation, we will give cost repairrment if still can repair.
· for reducing the cost of our customers, we can supply the materials or tech support to them, help them fix the problems in their hands

How could I get samples? 

       We can provide samples if you have?a Fedex or DHL account or other courier freight collectable account and agree?to pay the courier freight.or,you send us the samples charge together with the courier cost by T/T.

How much the courier freight will be for the samples? 
        Courier freight depends on the quantity, weight and carton size and your area.

 How can I get your price list? 

        Please send us your email or fax for our price list and order information. 
Can we have our logo or company name to be printed on your products or the package?   
        Yes, you can. We can print your Logo and company name etc in our products by silk screen printing according to your artwork design, and the minimum quantity for silk screen printing is 2000 units per logo. You can send us the artwork by email in JPG, TIF, AI, EPS, TIFF or CorelDraw formats.

 What's your usual payment term for orders? 

       We accept terms of T/T in advance or L/C at sight, and T/T preferable under US$20,000.