VOXLINK 120m HDMI Matrix Extender over Lan Ethernet CAT5e/6 IP(Support multipoint to multipoint IR c

 VOXLINK 120m HDMI Matrix Extender over Lan Ethernet CAT5e/6 IP(Support multipoint to multipoint IR control 1080P)

1.Introduction

120m HDMI Matrix Extender over IP is a device based on the standard TCP/IP protocol for transmitting HD audio and video source over LAN . It transmits your HD display with the high resolutions up to 120 meters away from your HDMI or DVI-D source by using one CAT5e/6 cable. At the same time, it’s also convenient to transmit HDMI audio and video source by point-to-point, multipoint-to-multipoint and cascade connection mode.

2.Features & Specifications

<!--[if !supportLists]-->Ø <!--[endif]-->Support HDMI1.3/HDCP1.1&1.2

<!--[if !supportLists]-->Ø <!--[endif]-->Support point-to-point mode, multipoint-to-multipoint mode and cascade connection mode.

<!--[if !supportLists]-->Ø <!--[endif]-->Standard 802.3 Ethernet

<!--[if !supportLists]-->Ø <!--[endif]-->Support one way IR extension.

<!--[if !supportLists]-->Ø <!--[endif]-->Pure hardware design, plug and play, do not need to install additional software

3.Package Contents

Before attempting to use this unit, please check the packaging and make sure the

following items are contained in the shipping carton:

<!--[if !supportLists]-->1) <!--[endif]-->one piece of HDMI transmitter

<!--[if !supportLists]-->2) <!--[endif]-->one piece of HDMI receiver

<!--[if !supportLists]-->3) <!--[endif]-->Two pieces of DC 5V power supply

<!--[if !supportLists]-->4) <!--[endif]-->One pair of IR transmitter and receiver

<!--[if !supportLists]-->5) <!--[endif]-->User’s Manual

4.Physical interface diagram

HDMI Transmitter

HDMI Receiver

5.Connection and operation

1) Connect the HDMI source to the HDMI Transmitter with HDMI cable

2) Connect the HDMI receiver to the HDTV display with HDMI cable.

3) Use one Cat5e/6 cable up to 120m to connect the Sender and Receiver.

4) Connect the “IR receiver “into “IR-TX” port on transmitter, and “IR transmitter ” into the “IR-RX” on receiver, and make sure the IR transmitter aim at IR receiver of the controlled device if you need the IR control function.

5) Connect two pieces of 5V power supply to the transmitter and receiver, power supply for the equipment and the LED indicator light on. When status lamp on and flicker, equipment starts normal.

6) Multipoint to multipoint match setting: when multipoint to multipoint connecting and multiple TX and multiple RX connect to the switch , the IP extender can match based on “SET” setting (eg: “SET” of TX is 0001, “SET” of RX is 0001). 

6.Application diagrams

Application 1: point to point application

Application 2: multipoint to multipoint application

Note: For multipoint to multipoint application, you’d better choose the gigabit switch with IGMP Multicast function and three layers protocol

Other VOXLINK HDMI to HDMI+audio Scaler video Converter Box support 4Kx2K@60Hz ,US/EU/UK

Introduction

The HDMI to HDMI 4Kx2K Scaler Converter is a universal converter for HDMI input to HDMI 4Kx2K@60Hz output. The scaler up/down conversion in this module employs black/white level expansion, color transition improvement, dynamic range expansion, blue stretch , auto-detect and auto-convert HDMI to HDMI output.

Features

1.        No need to install drivers, portable, flexible, plug and play.

2.        Provide advanced signal processing with great precision, colors, resolutions, and details.

3.        Support scaler up, scaler down digital signal porcess.

4.        Support multi- HDMI input formats.

5.        Support HDMI 4Kx2K@60Hz, 4Kx2K@30Hz,1080p@60Hz or 720p@60Hz output.

Package

1.HDMI to HDMI 4Kx2K Scaler Converter          1 pcs

2.5V1A DC Power Supply Adaptor        1 pcs

3.Operation Manual             1 pcs

Specification

Input ports: 1x HDMI, 1 x Min- USB

Output ports: 1xHDMI, 1xEarphone       

Dimensions(mm):   93(D)x84(W)x28(H)

Wight (g):  155g

HDMI input resolution:    480i to 4Kx2K@30Hz

HDMI output resolution:   4Kx2K@60Hz,4Kx2K@30Hz,1080P@60Hz,720P@60Hz

DVI output resolution:         1080P@60Hz,720P@60Hz

Operating Temperature             0°C ~ 40°C / 32°F ~ 104°F

Storage Temperature          -20°C ~ 60°C / -4°F ~ 140°F

Elative Humidity      20 ~ 90% RH (Non-condensing)

Power Consumption (Max)       3.5W

ESD Protection       Human Body Model:    

± 8kV (air-gap discharge)

± 4kV (contact discharge)

Operation Controls and Functions

1.      AUDIO output: These slot is where you connect to the audio amplifier with 3.5mm earphone cable

2.      HDMI input: These slot is where you connect the HDMI source output from DVD, PC or Laptop.

3.      DC 5V IN: Connect the 5V DC power supply into the Converter.

4.      HDMI OUT: The HDMI OUT connect to HDMI equipped TVs or monitors.

5.      UPDATe: System software update.

6.      Power LED: This red LED illuminate when the device is connected with power supply.

7.      Resolution Button: Press this button to select the output resolution.

8.      ZOOM Button: Press this button the scaling of the output picture.

9.      DVI/HDMI Button: Press this button to select DVI or HDMI output.

NOTE: When select DVI output, the output resolution of 1080p or 720p.

 Connection and Installation

1.  Connect a source such as a PC to the Converter VGA input.

2.  Connect the audio signal via the 3.5mm earphone cable.

3.  Connect a display such as a monitor, TV or Projector to the HDMI output on the Converter.

4.  Power on the device and display.

1.we offer various options including DHL,TNT ,UPS,EMS,FEDEX etc,and it would be beneficial for large orders by sea.
2.If you have a shipping account or shipping forward,it could be better,but if you don't have,then we can help you to choose the best way to ship the goods.
Why did our Customers choose us?
1.Strong R&D support
We have a strong R & D team with rich experience in the filed of audio products Fully possess the capability to do 2D design, 3D design, prototype, and so on.
2.Complete Facilities
Having own plastic injection center for doing all the injections by ourselves;
With coating and printing workshop for plastic coating, UV, and silk or pad printing;
Possessing advanced testing equipments for strict quality control & new product development;
With package sealing machines and ultrasonic machines.
3.10 Years of Experiences
Since the establishment, in 2003, we have been dedicated to providing customers with customer satisfaction oriented OEM & ODM services and specialized in designing, manufacturing and marketing medium and high end headphones, headsets, earphones, mobile phone headsets, mini speakers, Skype phone, new concept music products and so on.
4.Long Term Supply Chain
With our sincere and common efforts, we enjoy a well organized and managed local supply chain for high quality products, competitive price, fast delivery, and convenient services.
5.Great Overseas Sales Team
With an overseas sales team with 20 members, they are familiar with the products we manufacture and have more than 3-5 years of experience in handling OEM & ODM projects with clients from worldwide.

OEM/ODM:

· Your Brand--OEM logo and custom Packing (4 color printing box, blister) will be no problem
· Your pantone color --no problem, MOQ 1000pcs
· Usually MOQ--500pcs, please ask us if we have order of other client, MOQ can be less, like 100,200pcs
Warranty & After-sale service:
· all of our products give 1 year warranty
· man-made destroy will be exception
· After the warrantee time, if we still in cooperation, we will give cost repairrment if still can repair.
· for reducing the cost of our customers, we can supply the materials or tech support to them, help them fix the problems in their hands

How could I get samples? 

       We can provide samples if you have?a Fedex or DHL account or other courier freight collectable account and agree?to pay the courier freight.or,you send us the samples charge together with the courier cost by T/T.

How much the courier freight will be for the samples? 
        Courier freight depends on the quantity, weight and carton size and your area.

 How can I get your price list? 

        Please send us your email or fax for our price list and order information. 
Can we have our logo or company name to be printed on your products or the package?   
        Yes, you can. We can print your Logo and company name etc in our products by silk screen printing according to your artwork design, and the minimum quantity for silk screen printing is 2000 units per logo. You can send us the artwork by email in JPG, TIF, AI, EPS, TIFF or CorelDraw formats.

 What's your usual payment term for orders? 

       We accept terms of T/T in advance or L/C at sight, and T/T preferable under US$20,000.